EGO ACCESSORIES

Primers are used to improve adhesion. They are used when joint seals are under particular stress owing to tension, pressure, shearing, moisture, temperature changes, etc., as well as for porous and absorbent substrates and plastics.

That depends on the particular sealant or adhesive and the substrate on which you want to use it. Many EGO products bond with many common materials without a Primer.

The EGO Primer table provides an overview of which Primer is used with which EGO product.

EGO ButylPRIMER PRO and EGO ButylPRIMER ECO are primers for EGO Butyl sealants. They are used for pre-treatment of porous and non-porous substrate materials for which the adhesion should be increased.

Yes. The EGO Primer table provides the relevant overview for this or through independent evaluation of the surface or if the adhesion without Primer is too low.

How much EGO BUTYLPRIMER PRO you need depends on what substrate you are dealing with. On average, you need between 150 and 250 millilitres per square metre.

What quantity of EGO ButylPRIMER ECO you need depends on the substrate. In general, approx. 100 to 150 millilitres per square metre is estimated.

EGO ButylPRIMER ECO is the solvent-free variant.